Industrial Flooring

BuildrockĀ® offer flooring solutions for industrial floors as well as for decorative floors according to the highest standards and considering indoor air quality, low VOC and odour, minimal maintenance requirements, easy and economic floor refurbishment, and low energy consumption in the life cycle, driven by the key Sustainability. For seamless flooring solutions we use a wide range of technologies: epoxy, epoxy-cementitious hybrid, P.M.M.A., polyurethane, polyurethane-cementitious hybrid, acrylic, acrylic-cementitious hybrid, cementitious, polyurea, polyaspartic.

We offer flooring systems that meet nearly every requirement and helps in achieving :

  • Built-in wear resistance and produces a high abrasion resistant floor surface.
  • Impact resistance twice that of plain concrete.
  • Three times greater surface density than plain concrete which increases resistance to penetration by oil, grease, hydraulic fluids, ethylene, glycol and many industrial chemicals.
  • May be used for open and continuously wet areas.
  • Non-rusting and easy maintenance.
  • Fast construction with minimum site costs for materials handling and no-bonding problems.
TDS
BUILDROCK SURFACE
TOP

It is a a ready-to-use factory processed and specially graded non-oxidising, non- magnetic, non-metallic and mineral aggregate dry shake surface hardener free from oil and grease.

TDS
BUILDROCK FLOOR
HARD CTM

It is a metallic dry shake floor Hardener and a one part pre blended Cementitious grey powder for concrete, consisting of cement, hard metallic top non corroding special admixture and pigment. It provides dense, tough and 10 time abrasion resistance compared to Control Concrete.

TDS
BUILDROCK FLOOR
LHD

It is a Liquid Silicate base compound, blended with other chemicals for Concrete Surface application. After its application, concrete will be hardened and become dust proof. It can be used as a sealer for concrete surface and as a fresh concrete for old concrete.

TDS
BUILDROCK FLOOR
41 PRIMER

It is a two part Solvent less Epoxy primer. It is especially suitable for a Highly Absorbent Surface.

TDS
BUILDROCK FLOOR
SL UNDERLAY

It is a three component Epoxy Modified System with Selected Natural Quartz Sand and some other additives. Buildrock floor SL Underlay provides a durable, hard and smooth surface and is also a good adhesion to Epoxy top coat .

TDS
BUILDROCK HG SL

It is a three component seamless epoxy resin based floor topping. It provides High Gloss colored Surface, dense and chemical resistant floor surface and can be applied as nominal 1 mm to 3mm thickness.